Long handle Self-reset 2 Pole rotary switch prevent follow-up 1contact button switch
XB series button switch
1. The contacts are made of AgCdO15 material, which has strong on and break power and long life.
2. The led button uses LED light for low power consumption and long life.
3. Both the knob switch and the key knob switch have a function to prevent follow-up and prevent the body from following the handle.
4. Two wiring methods are available:
(1) screw wiring, (2) plug-in wiring.
l Screw wiring: simple and convenient.
l Plug-in wiring: high connection reliability, especially suitable for use in vibration more powerful places, such as: cars, lawn mowers, engineering machinery and so on.
5. Can be installed on the thickness of 10mm mounting panel, is the best of its kind.
6. Integrated structural design, installation is very convenient, while avoiding the installation of the quality problems caused by the lack of installation.
7. The product's performance meets the requirements of the national standard GB14048.5 (IEC60947-5-1) and is CCC product certified.
XB series button switch technical parameters
Features of the contact
Rated insulation voltage
Agreed heat current
Resistive load (DC-12)
Inductive load (DC-13)
Rated impact-resistant voltage
Uimp = 4 kV
N/C The contact is definitely disconnected (compliant with European safety standards)
Minimum 1 x 0.5 mm2 without a wire connector
Tightening moment: 0.5 N.m (recommended value)
Up to 2 x 1.5 mm2 with wire connector head
0.8*2.8 mm Faston Connector
Q: How to confirm the sensors model ?
A. The buyer need to provide the below information :
Voltage NPN/PNP NO/NC/NO+NC Detected object Detected distance
Q: How to adjust the distance of the photoelectric switch ?
A. Clockwise make the detected distance increase and anti-clockwise decrease
Q: If i want to release order, what's the process?
A: Thanks. You can send inquiry to us by Maoyt or send us by email, we will reply within 24hrs.