Export standard carton box or ODM for digital din rail 24 hours timer switch
Shipped in 7 days after payment
CE SUL181H AC220V 16A with battery Din rail 24 hours digital timer switch
Circulation of day
Nunction & usage:
1. The daily maximum is ten group of on/off and the weekly maximm is seventy groups of on/off. The arbitrarily setting of daily on-off program or of the gropus of on-off program is available. The minimum on-off intervals in 1min.Hand operation is available.
2. The plug-in mode avoids wiring,featuring small volume, wide working temperature and strong Anti-interference , etc
3. It can serve in neon lamp,road lamp and water & material feeding in aquiculture, tool, switchgear cubicle and distribution case for automatical control. At family, it can serve as turning on and off lamp, TV and air conditioner by timing. Then the family will emter intelligence era.
Rated voltage:220V/50HZ Mains voltage range:160V-240V Resistance load:16A Power consumption<2VA Timing range:1min-168h Ten groups of timing is available in the form of hand and automation. Timing error:<±0.5s/day Ambient temperature range:-25~60°C Relative humidity:<95%
Press the key of ‘CLOCK’ and then press the key of “WEEK” to determine the week. Press the key of “HOURS’ to determine the hours and press the key of “MIN” to determine the minute. Releasing the key of “MIN” means that the timing will press repeatedly relevant Key.
Timing program setting:
Seven mode of automatica on/off timing. Select following program combination is of recommendation. From Monday to Sunday Every day of a week From Monday to Friday From Saturday to Sunday From Monday to Saturday Monday, Tuesday, Wednesday Thursday, Friday, Saturday
After selection of the above-mentioned mode, then it is to set day, hours,minute to determine on/off time. Press the key of “PROG” to set the time for first on and the left of the screen will display “ON1”, which means that the entry of first group of on program will be available.
Press the key of “WEEK” to select needful mode among the program package, and press the keys of “HOURS” and “MIN” to select the needful.
Repress the key of “PROG” and the crystal screen will display “OFF1”,whick means that entry of first group of on program is available. Respectively press the key of “WEEK”, “HOURS” and “MIN” to set. Repress the key of “PROG” to enter another group of program set. And repeating such procedure can set residual nine group of on/off modes,. To such idel mode, the user can cancel it with the key of “RST/RCL”, which will leace the “-:-” on the screen.
After setting of on/off program, press the key of “CLOCK”, and the crystal screen will return to present time. Then the timing function will start.
Repeatedly press the key of “PROG” to watch the program that has been set in turn.
Press the key of “ON/AUTO/OFF” to select the three modes of PERMANENTION-AUTOMATION-PERMANENT OFF. In case of the mode off AUTOMATION ,the timer can automatically operate in accordance with set program. The set program just runs in case of the mode of ATUOMATION. In case of the mode of “PERMANENT OFF”, the timer will automatically turn off. In case of the mode off “PERMANENT ON” ,the timer will automatically run.
Press the key of “RESET” with in case of the mode of AUTOMATION. The time and on-off program.
No use at external lead. No connect it to the electrical aooliance which are running. No exceed maximum load range (see what printd at it is surface) No connect it to air heater out of monitor or oven with heating wire exposed No insert the needle or any metal into power socket-out No palce it at such places as subjectto samp, overhigh or overlow temperature andeasy to collision or shake. Resort to specialist to detachment for servcing . Clean enclosure enclosure and crystal screen with cloth. No use corrosive liquid amd water.
The maximum load of electronical timer is print in the mark on the products. No use out of nominated range. Refer to Note for details as aboce.
Packaging & Shipping
Yueqing Winston Electric Co., Ltd. is not only an exporting company, but also a professional manufacturer in China. We have our own production base. The products we professionally deal with are switching power supplies, sensors, relays, voltage stabilizers, AC contactors, circuit breakers, distribution boxes, industrial plugs & sockets and others. Since we are a manufacturer & exporter, we are sure that we can best support our customers with high quality products and the most competitive prices. Our company is located in Wenzhou - the Electric Capital of China. We specialize in developing, manufacturing and distributing low voltage & high voltage electrical products. We are an ISO9001:2000 certified company.